How To Paint a Dresser
Get professional results painting your kitchen cabinets with a paint sprayer with this tutorial that gives all my tips and tricks from a professional painter.
Yield: 1 dresser
Cost: $50
Equipment
- Paint Brush
Materials
- TSP or Degreaser
- Sand paper 220 and 120 grit
- Sanding Blocks 80 or 120 grit
- Wood Filler Only for imperfections or filling old hardware
- Lint-free Microfiber rollers
- Paint trays
- Stainblocking Primer
- Paint
- Protective Top Coat
Instructions
- Remove doors and drawers. Unscrew hardware.
- Clean using Tri-Sodium Phosphate or a mild degreaser for getting any grime and dirt off. Repair scratches with wood filler.
- Sand any glossy varnish or coating off. You do not need to sand every bit of previous stain or paint off if it is in good condition. Sanding is going to give the best bond, and always sand high traffic surfaces such as tabletops, around doorknobs, or dresser tops. Use an orbital sander with 120 grit to make this much easier. Vacuum and wipe all dust off of the panels before priming.
- Prime the cabinets with a quality primer. Kilz Premium (not original) is my no-fail primer. For very light colors, use 2 coats of primer. Allow to dry 24 hours.
- Paint the dresser with 2 coats of paint. You can use either a paint sprayer or brushes and rollers. If brushing, brush with the grain and always from one end to the other. If paint starts to dry, don't go back over it.
Notes
Guide to Cleaning Furniture for Painting
- Knots - use a shellac based primer
- Gooey stuff/adhesive - I like Goo Gone for gooey messes, but make sure to clean off with a degreaser or teaspoon afterwards to remove any residue.
- Grease stains - clean with a good degreaser like Simple Green to break up what you can.
- Permanent Marker/food coloring/other - Clean as best you can with teaspoon and then prime at least two coats.
- Get the right tools. A few extra dollars will save you a lot of heartache and frustration. I have a helpful post on painting without brush strokes here. I prefer fine taklon brushes.
- Tape off any edges you don’t want painted such as inside doors.
- Use a lint free -microfiber roller across all flat or large surfaces for the smoothest finish.
- You will get the best results if you brush details or corners then roll before the paint has time to dry.